In Vivo Predictive Dissolution and Biopharmaceutic-Based In Silico Model to Explain Bioequivalence Results of Valsartan, a Biopharmaceutics Classification System Class IV Drug.

The purpose of this study was to predict the in vivo bioequivalence (BE) outcome of valsartan (VALS, BCS class IV) from three oral-fixed combination products with hydrochlorothiazide (HCTZ, BCS class III) (Co-Diovan® Forte as reference and two generic formulations in development) by conducting in vivo predictive dissolution with a gastrointestinal simulator (GIS) and a physiologically based biopharmaceutic model (PBBM). In the first BE study, the HCTZ failed, but the VALS 90% CI of Cmax and the AUC were within the acceptance limits, while, in the second BE study, the HCTZ 90% CI of Cmax and the AUC were within the acceptance limits, but the VALS failed. As both drugs belong to different BCS classes, their limiting factors for absorption are different. On the other hand, the gastrointestinal variables affected by the formulation excipients have a distinct impact on their in vivo exposures. Dissolution tests of the three products were performed in a GIS, and a PBBM was constructed for VALS by incorporating in the mathematical model of the in vitro-in vivo correlation (IVIVC) the gastrointestinal variables affected by the excipients, namely, VALS permeability and GI transit time. VALS permeability in presence of the formulation excipients was characterized using the in situ perfusion method in rats, and the impact of the excipients on the GI transit times was estimated from the HCTZ's in vivo results. The model was able to fit the in vivo BE results with a good prediction error. This study contributes to the field by showing the usefulness of PBBM in establishing in vitro-in vivo relationships incorporating not only dissolution data but also other gastrointestinal critical variables that affect drug exposure in BCS class IV compounds.

Exploring a Bioequivalence Failure for Silodosin Products Due to Disintegrant Excipients.

Some years ago, excipients were considered inert substances irrelevant in the absorption process. However, years of study have demonstrated that this belief is not always true. In this study, the reasons for a bioequivalence failure between two formulations of silodosin are investigated. Silodosin is a class III drug according to the Biopharmaceutics Classification System, which has been experimentally proven by means of solubility and permeability experiments. Dissolution tests have been performed to identify conditions concordant with the non-bioequivalent result obtained from the human bioequivalence study and it has been observed that paddles at 50 rpm are able to detect inconsistent differences between formulations at pH 4.5 and pH 6.8 (which baskets at 100 rpm are not able to do), whereas the GIS detects differences at the acidic pH of the stomach. It has also been observed that the differences in excipients between products did not affect the disintegration process, but disintegrants did alter the permeability of silodosin through the gastrointestinal barrier. Crospovidone and povidone, both derivatives of PVP, are used as disintegrants in the test product, instead of the pregelatinized corn starch used in the reference product. Permeability experiments show that PVP increases the absorption of silodosin-an increase that would explain the greater Cmax observed for the test product in the bioequivalence study.

Integration of In Silico, In Vitro and In Situ Tools for the Preformulation and Characterization of a Novel Cardio-Neuroprotective Compound during the Early Stages of Drug Development.

The main aim of this work is the biopharmaceutical characterization of a new hybrid benzodiazepine-dihydropyridine derivative, JM-20, derived with potent anti-ischemic and neuroprotective effects. In this study, the pKa and the pH-solubility profile were experimentally determined. Additionally, effective intestinal permeability was measured using three in vitro epithelial cell lines (MDCK, MDCK-MDR1 and Caco-2) and an in situ closed-loop intestinal perfusion technique. The results indicate that JM-20 is more soluble at acidic pH (9.18 ± 0.16); however, the Dose number (Do) was greater than 1, suggesting that it is a low-solubility compound. The permeability values obtained with in vitro cell lines as well as with the in situ perfusion method show that JM-20 is a highly permeable compound (Caco-2 value 3.8 × 10-5). The presence of an absorption carrier-mediated transport mechanism was also demonstrated, as well as the efflux effect of P-glycoprotein on the permeability values. Finally, JM-20 was provisionally classified as class 2 according to the biopharmaceutical classification system (BCS) due to its high intestinal permeability and low solubility. The potential good oral absorption of this compound could be limited by its solubility.

One and Two-Step In Vitro-In Vivo Correlations Based on USP IV Dynamic Dissolution Applied to Four Sodium Montelukast Products.

Montelukast is a weak acid drug characterized by its low solubility in the range of pH 1.2 to 4.5, which may lead to dissolution-limited absorption. The aim of this paper is to develop an in vivo predictive dissolution method for montelukast and to check its performance by establishing a level-A in vitro-in vivo correlation (IVIVC). During the development of a generic film-coated tablet formulation, two clinical trials were done with three different experimental formulations to achieve a similar formulation to the reference one. A dissolution test procedure with a flow-through cell (USP IV) was used to predict the in vivo absorption behavior. The method proposed is based on a flow rate of 5 mL/min and changes of pH mediums from 1.2 to 4.5 and then to 6.8 with standard pharmacopoeia buffers. In order to improve the dissolution of montelukast, sodium dodecyl sulfate was added to the 4.5 and 6.8 pH mediums. Dissolution profiles in from the new method were used to develop a level-A IVIVC. One-step level-A IVIVC was developed from dissolution profiles and fractions absorbed obtained by the Loo-Riegelman method. Time scaling with Levy's plot was necessary to achieve a linear IVIVC. One-step differential equation-based IVIVC was also developed with a time-scaling function. The developed method showed similar results to a previously proposed biopredictive method for montelukast, and the added value showed the ability to discriminate among different release rates in vitro, matching the in vivo clinical bioequivalence results.

An In Vivo Predictive Dissolution Methodology (iPD Methodology) with a BCS Class IIb Drug Can Predict the In Vivo Bioequivalence Results: Etoricoxib Products.

The purpose of this study was to predict in vivo performance of three oral products of Etoricoxib (Arcoxia® as reference and two generic formulations in development) by conducting in vivo predictive dissolution with GIS (Gastro Intestinal Simulator) and computational analysis. Those predictions were compared with the results from previous bioequivalence (BE) human studies. Product dissolution studies were performed using a computer-controlled multicompartmental dissolution device (GIS) equipped with three dissolution chambers, representing stomach, duodenum, and jejunum, with integrated transit times and secretion rates. The measured dissolved amounts were modelled in each compartment with a set of differential equations representing transit, dissolution, and precipitation processes. The observed drug concentration by in vitro dissolution studies were directly convoluted with permeability and disposition parameters from literature to generate the predicted plasma concentrations. The GIS was able to detect the dissolution differences among reference and generic formulations in the gastric chamber where the drug solubility is high (pH 2) while the USP 2 standard dissolution test at pH 2 did not show any difference. Therefore, the current study confirms the importance of multicompartmental dissolution testing for weak bases as observed for other case examples but also the impact of excipients on duodenal and jejunal in vivo behavior.

pH-Dependent Molecular Gate Mesoporous Microparticles for Biological Control of Giardia intestinalis.

Giardiasis is a parasitism produced by the protozoa Giardia intestinalis that lives as trophozoite in the small intestine (mainly in the duodenum) attached to the intestinal villus by means of billed discs. The first line treatment is metronidazole, a drug with high bioavailability, which is why to obtain therapeutic concentrations in duodenum, it is necessary to administer high doses of drug to patients with the consequent occurrence of side effects. It is necessary to developed new therapeutical approaches to achieve a local delivery of the drug. In this sense, we have developed gated mesoporous silica microparticles loaded with metronidazole and with a molecular gate pH dependent. In vitro assays demonstrated that the metronidazole release is practically insignificant at acidic pHs, but in duodenum conditions, the metronidazole delivery from the microparticles is effective enough to produce an important parasite destruction. In vivo assays indicate that this microparticulate system allows to increase the concentration of the drug in duodenum and reduce the concentration in plasma avoiding systemic effects. This system could be useful for other intestinal local treatments in order to reduce doses and increase drug availability in target tissues.

Effect of excipients on oral absorption process according to the different gastrointestinal segments.

INTRODUCTION: Excipients are necessary to develop oral dosage forms of any Active Pharmaceutical Ingredient (API). Traditionally, excipients have been considered inactive and inert substances, but, over the years, numerous studies have contradicted this belief. This review focuses on the effect of excipients on the physiological variables affecting oral absorption along the different segments of the gastrointestinal tract. The effect of excipients on the segmental absorption variables are illustrated with examples to help understand the complexity of predicting their in vivo effects. AREAS COVERED: The effects of excipients on disintegration, solubility and dissolution, transit time, and absorption are analyzed in the context of the different gastrointestinal segments and the physiological factors affecting release and membrane permeation. The experimental techniques used to study excipient effects and their human predictive ability are reviewed. EXPERT OPINION: The observed effects of excipient in oral absorption process have been characterized in the past, mainly in vitro (i.e. in dissolution studies, in vitro cell culture methods or in situ animal studies). Unfortunately, a clear link with their effects in vivo, i.e. their impact on Cmax or AUC, which need a mechanistic approach is still missing. The information compiled in this review leads to the conclusion that the effect of excipients in API oral absorption and bioavailability is undeniable and shows the need of implementing standardized and reproducible preclinical tools coupled with mechanistic and predictive physiological-based models to improve the current empirical retrospective approach.

Effect of thickener on disintegration, dissolution and permeability of common drug products for elderly patients.

Dysphagia is a very common problem suffered by elderly patients. The use of thickeners during administration in these patients helps to prevent difficulties with swallowing larger solid dosage forms. However, there are several indications when the thickeners may influence disintegration and dissolution processes of solid dosage forms, potentially affecting therapeutic efficacy. In this paper the effects of a commonly used thickener on tablet disintegration, dissolution and subsequent absorption of 6 formulated drugs frequently used in elderly patients (Aspirin, Atenolol, Acenocumarol, Candesartan, Ramipril and Valsartan) in two different administration conditions (intact tablet and crushed tablet) are reported. Disintegration times were determined using a modified disintegration test device. The presence of thickener leads to a pseudoplastic behavior with clearly increased viscosity values. The thickener was also shown to significantly affect the release processes (dissolution and disintegration), but not the permeability of the studied drugs. When tablets are crushed the effect of the thickener on drug dissolution is avoided. Consequently, crushing the tablets would be a recommendation for these drugs if the use of a thickener is necessary in patients with dysphagia.

Effect of Common Excipients on Intestinal Drug Absorption in Wistar Rats.

The aim of the present paper is to study the effect of common excipients on the permeability of atenolol (as drug absorbed mainly by passive diffusion) and rhodamine (as P-glycoprotein substrate). The apparent permeability was measured by an in situ perfusion method in Wistar rats using the closed loop Doluisio's method. Permeability values were characterized in the absence and presence of 18 commonly used excipients. Excipient concentrations were selected based on the amounts in oral immediate release dosage forms, which failed the test during the human bioequivalence studies. Atenolol was studied with and without excipients in the whole small intestine, whereas rhodamine was tested in three different intestinal segments to account for the differential expression of P-glycoprotein, and it was further on tested in the ileum, in the presence of excipients. Atenolol presented higher permeability values when it was administered with colloidal silica, croscarmellose, hydroxypropyl methylcellulose (HPMC), magnesium stearate, MgCO3, poly(ethylene glycol) 400, poly(vinylpyrrolidone), sorbitol, starch, and TiO2 rhodamine showed higher permeability values when it was administered with croscarmellose and HPMC. On the one hand, the mechanisms of action were not discernible with the proposed experiments. On the other hand, commercial formulations do not present a single excipient but several, which can counteract their effects. The in situ perfusion technique can be useful for a preliminary screening and risk analysis, while the in vivo pharmacokinetic results would be needed to define conclusive effects.

In vitro prediction of in vivo absorption of ibuprofen from suspensions through rational choice of dissolution conditions.

Two ibuprofen suspension formulations were investigated for their dissolution in various bicarbonate, phosphate and acetate buffers. Phosphate and acetate gave faster release than bicarbonate at comparable molarities. Nevertheless, mass transport modelling using the reversible non-equilibrium (RNE) approach enabled the calculation of phosphate molarities that gave good matches to physiological bicarbonate in terms of ibuprofen dissolution. This shows that developing surrogate buffers for bicarbonate that are devoid of the technical difficulties associated with the bicarbonate-CO2 systems is possible. In addition, the intestinal dissolution kinetics of the tested suspensions were determined by applying compartmental pharmacokinetic modelling to plasma profiles that were previously obtained for these suspensions in an in vivo study performed on healthy human volunteers. The in vitro dissolution profiles in bicarbonate compared reasonably well with the profiles representing the in vivo intestinal dissolution kinetics of the tested suspensions when applied to healthy human volunteers in a pharmacokinetic study. This shows the possible potential toward extending biowaivers so that they include BCS class IIa compounds.

Investigation to Explain Bioequivalence Failure in Pravastatin Immediate-Release Products.

The purpose of this work is to explore the predictive ability of the biopharmaceutics classification system (BCS) biowaiver based on the dissolution methods for two pravastatin test products, where one of them showed bioequivalence (BE) while the other test failed (non-bioequivalence, or NBE), and to explore the reasons for the BE failure. Experimental solubility and permeability data confirmed that pravastatin is a BCS class III compound. The permeability experiments confirmed that the NBE formulation significantly increased pravastatin permeability, and could explain its higher absorption rate and higher Cmax. This finding highlights the relevance of requiring similar excipients for BCS class III drugs. The BCS-based biowaiver dissolution tests at pH 1.2, 4.5, and 6.8, with the paddle apparatus at 50 rpm in 900 mL media, were not able to detect differences in pravastatin products, although the NBE formulation exhibited a more rapid dissolution at earlier sampling times. Dissolution tests conducted in 500 mL did not achieve complete dissolution, and both formulations were dissimilar because the amount dissolved at 15 min was less than 85%. The difference was less than 10% at pH 1.2 and 4.5, while at pH 6.8 f2, results reflected the Cmax rank order.

Exploring Bioequivalence of Dexketoprofen Trometamol Drug Products with the Gastrointestinal Simulator (GIS) and Precipitation Pathways Analyses.

The present work aimed to explain the differences in oral performance in fasted humans who were categorized into groups based on the three different drug product formulations of dexketoprofen trometamol (DKT) salt-Using a combination of in vitro techniques and pharmacokinetic analysis. The non-bioequivalence (non-BE) tablet group achieved higher plasma Cmax and area under the curve (AUC) than the reference and BE tablets groups, with only one difference in tablet composition, which was the presence of calcium monohydrogen phosphate, an alkalinizing excipient, in the tablet core of the non-BE formulation. Concentration profiles determined using a gastrointestinal simulator (GIS) apparatus designed with 0.01 N hydrochloric acid and 34 mM sodium chloride as the gastric medium and fasted state simulated intestinal fluids (FaSSIF-v1) as the intestinal medium showed a faster rate and a higher extent of dissolution of the non-BE product compared to the BE and reference products. These in vitro profiles mirrored the fraction doses absorbed in vivo obtained from deconvoluted plasma concentration⁻time profiles. However, when sodium chloride was not included in the gastric medium and phosphate buffer without bile salts and phospholipids were used as the intestinal medium, the three products exhibited nearly identical concentration profiles. Microscopic examination of DKT salt dissolution in the gastric medium containing sodium chloride identified that when calcium phosphate was present, the DKT dissolved without conversion to the less soluble free acid, which was consistent with the higher drug exposure of the non-BE formulation. In the absence of calcium phosphate, however, dexketoprofen trometamol salt dissolution began with a nano-phase formation that grew to a liquid⁻liquid phase separation (LLPS) and formed the less soluble free acid crystals. This phenomenon was dependent on the salt/excipient concentrations and the presence of free acid crystals in the salt phase. This work demonstrated the importance of excipients and purity of salt phase on the evolution and rate of salt disproportionation pathways. Moreover, the presented data clearly showed the usefulness of the GIS apparatus as a discriminating tool that could highlight the differences in formulation behavior when utilizing physiologically-relevant media and experimental conditions in combination with microscopy imaging.

Determination of intestinal permeability using in situ perfusion model in rats: Challenges and advantages to BCS classification applied to digoxin.

The purpose of this work was to describe the closed loop in situ perfusion method in rats and to compare the difficulties and advantages with other methods proposed by regulatory agencies for BCS classification and finally to illustrate its application to evaluate the permeability of digoxin at relevant clinical concentrations. Digoxin was evaluated at two concentration levels: 1.0 µg/ml (with and without sodium azide 65.0 µg/ml) and 6.0 µg/ml. These concentrations correspond to the ratio of the highest dose strength (0.25 mg) and the highest single dose administered (1.5 mg) and the 250 ml of water. In situ closed loop perfusion studies in rats were performed in the whole small intestine and also in duodenum, jejunum and ileum segments to evaluate the relevance of P-gp secretion in the overall permeability. A kinetic modelling approach involving passive permeation and efflux transport mechanism allowed the estimation of the passive diffusional component and the Michaelis-menten parameters. The estimated Km value demonstrated that at clinical luminal concentrations the efflux process is not saturated and then it could be inhibited by other drugs, excipients or food components leading to the already reported clinical drug-drug and drug-food interations. The present data confirms from a mechanistic point of view these interactions.

In Vitro Dissolution as a Tool for Formulation Selection: Telmisartan Two-Step IVIVC.

The purpose of this investigation was to develop an exploratory two-step level A IVIVC for three telmisartan oral immediate release formulations, the reference product Micardis, and two generic formulations (X1 and X2). Correlation was validated with a third test formulation, Y1. Experimental solubility and permeability data were obtained to confirm that telmisartan is a class II compound under the Biopharmaceutic Classification System. Bioequivalence (BE) studies plasma profiles were combined using a previously published reference scaling procedure. X2 demonstrated in vivo BE, while X1 and Y1 failed to show BE due to the lower boundary of the 90% confidence interval for Cmax being outside the acceptance limits. Average plasma profiles were deconvoluted by the Loo-Riegelman method to obtain the oral fractions absorbed ( fa). Fractions dissolved ( fdiss) were obtained in several conditions in USP II and USP IV apparatus, and later, the results were compared in order to find the most biopredictive model, calculating the f2 similarity factor. The apparatus and conditions showing the same rank order than in vivo data were selected for further refinement of conditions. A Levy plot was constructed to estimate the time scaling factor and to make both processes, dissolution and absorption, superimposable. The in vitro dissolution experiment that reflected more accurately the in vivo behavior of the different formulations of telmisartan employed the USP IV dissolution apparatus and a dissolution environment with a flow rate of 8 mL/min and a three-step pH change, from 1.2 to 4.5 and 6.8, with a 0.05% of Tween 80. Thus, these conditions gave rise to a biopredictive dissolution test. This new model is able to predict the formulation differences in dissolution that were previously observed in vivo, which could be used as a risk-analysis tool for formulation selection in future bioequivalence trials.

Comparison of segmental-dependent permeability in human and in situ perfusion model in rat.

Nowadays, alternative methods have been developed to predict intestinal permeability values in human as in vitro, in situ or ex vivo methods. They were developed by the necessity to avoid the problems of the human permeability experiments. However, determination of human permeability is needed to properly validate the alternative methods. For this reason, recently, Dahlgren et al. published an indirect method based on a deconvolution technique to estimate the human permeability in different gastrointestinal segments (jejunum, ileum and colon). Therefore, the objective of this research was to demonstrate that Doluisio technique is a useful method to predict the human permeability in different gastrointestinal segments. To achieve this goal, the rat permeability in different segments, of the same drugs studied by Dahlgren et al. (atenolol, metoprolol and ketoprofen), have been compared with the human data obtained by the deconvolution method. The results obtained in this work show that the Doluisio method is a reliable tool to predict segmental human permeability. Consequently, the deconvolution method can be employed to build an extensive database of human permeability, overall from ileum and colon, because there is a lack of human permeability data of these distal segments. Once there are enough human data available, the Doluisio technique will be a valuable alternative method to predict the permeability of new molecules with therapeutic activity without the requirement of human experiments.